Why My PS4 Controller Light Is Red? [Fixed]

Why My PS4 Controller Light Is Red

When PS4 was first released, the red light issue did not exist, but after a few years due to the high number of users and sales, it became common. You may have seen a lot of questions like “why my ps4 controller is red?” or “ps4 keeps flashing white and red lights” and you don’t know what to do. Let’s take a look at everything we know about the PS4 red light blinking error.

What Does The PS4 Controller Red Light Means?

When the red light appears on your PS4 controller, it indicates that the controller is not connected to the console. Additionally, it signifies that your battery is running low and needs to be charged. If your controller’s light is blinking, then there is an issue with its connection or syncing with the console.

Also Read: How To Fix PS4 Controller Won’t Turn On

How To Fix The PS4 Controller Red Light?

There are several ways to fix your Dualshock 4 Red Light issue, some of the most effective fixes are mentioned below:-

  • Replace the battery of your PS4 controller
  • Reset your console
  • Reset your controller
  • Replace your PS4 controller with a new one or repair it via professional service, if you are not able to fix it yourself or just want to save time and money!

1. Replace Dualshock 4 Cable

If you’re charging your controller and it’s not turning on, you may have to replace the cable. The first thing you should do is make sure that the charger is plugged into a power outlet and that both ends of the cable are securely connected to one another. If your controller still won’t turn on, go through these steps:

  • Check that the port on your PS4 console isn’t loose or damaged by gently inserting and removing other devices such as a USB thumb drive or headset with ease. If they don’t fit properly, then proceed to step two.
  • Disconnect all other devices from its ports except for what makes up your PlayStation 4 setup (i.e., only plug-in gaming consoles). You can even disconnect USB devices if necessary; however, be aware that doing so will mean having to reconnect them later when making changes again (such as updating the firmware).

2. PS4 Controller Worn Out Battery

If the light on your PS4 controller turns red, it may indicate that your battery is depleted and requires replacement. To address this, you can attempt recharging the controller or opt for a complete battery replacement with a new one.

3. Reset The PS4 Console

The next step to try is resetting your PS4 console.

To perform this action, press and hold the power button on the PS4 for 10 seconds until it shuts down. After approximately 5 seconds, press and hold the power button once more. The console should restart and begin scanning for devices.

If that doesn’t work, try resetting your controller by pressing and holding both sticks at once with something pointed out like a pen or screwdriver (carefully). Hold them down for 10 seconds then release. If that doesn’t work either, you may need to call Sony support as they can help further troubleshoot the issue with their technical experts

Must See: How To Fix PS4 Error Code CE-34878-0

4. Reset The PS4 Controller

If your controller is still not responding to any buttons, you may want to reset the controller. To do this, press and hold the PS button on your controller until the light bar turns off, then release it and wait for it to turn back on again.

Once that happens, press and hold the PS button once more until you see another quick flash of white light in addition to a solid red light for about two seconds before returning back to normal mode.

5. Put PS4 Into Safe Mode

If the PS4 controller red light is on, this means that your DualShock 4 controller is having some connectivity issues with your console. The good news is that there are a few things you can try to fix this problem.

One of the first things you should do when trying to fix this issue is turn off and turn on your PS4 controller again. Just press and hold down the power button until it turns off completely, wait for a few moments, then press and hold again until it turns back on. If you’re still having problems after doing this three or four times then move on to step two below!

6. Replace The Ribbon Cable

If none of the previous solutions work, you may need to replace the ribbon cable. There are two ribbon cables in your PS4 controller: one for charging and one for data transfer between accessories such as the touchpad and lightbar.

The charging cable is easier to find because it’s connected to the t bottom end of your PS4 controller, while the data transfer cable can be found on either side of your PS4 controller depending on which model you have. If possible, try replacing both ribbon cables at once so that no problems occur in future gameplay sessions!

Also See: How To Fix PS5 Error Code CE-100095-5

7. Check The USB Port

If you’re getting a red light in the port, it’s likely that there is debris or damage in the USB port. You can try cleaning this out with compressed air, but if this doesn’t work, you will need to replace either your controller or the USB port itself.

If there is no damage visible on either one of these components, then it’s time for a new controller! If you want to know how to fix this problem permanently though, I’d recommend using a USB hub instead of buying another PS4 controller just yet.

Wrapping Up

I hope this article helped you out. The red light on the PS4 controller is nothing to be afraid of and it can be fixed by following these tips. If you have any other issues, feel free to reach out to us via the comment section below and we will help you out.

Posted by
Aman Panchal

A tech fanatic with a hunger for knowledge in the ever growing field of technology. Keen interest in customizing Android device and watching more Netflix than people.